Rear Final Drive 0BD

WARNING: This page is about a different variant/trim than selected.

NOTE:

Code letters, transmission allocations, ratios, capacities, refer to Specifications .

When repairing the driveshaft or the rear final drive, refer to Removal and Installation

Location on Rear Final Drive

Fig 1: Identifying Final Drive 0BD Code Letters And Manufacture Date

Courtesy of AUDI OF AMERICA, LLC

Final drive 0BD, code letters and manufacture date -arrow-

-A arrow- Final Drive 0BD, Including Part Number (for example: 0BD 500 043A)

Fig 2: Identifying Final Drive 0BD Including Part Number

Courtesy of AUDI OF AMERICA, LLC

-Arrow B- code letters "JTN"

-Arrow C- rear final drive date of manufacture

Example:	F	292	3242
	I	I	I
	Production year -2006- F = 2006, G = 2007, H = 2008...	Day of manufacture -292. calendar day- (always three digits)	day of manufacture serial number

Additional data can be ignored.

NOTE:

When installing a new rear final drive unit, the final drive code, the PR number and the vehicle engine code must be verified. This is the only to assure the correct allocation.