Noise Insulation, Removing And Installing, AUDI RS5: Removing

-- Remove the bolts -arrows- .

-- Remove the bolts -arrows- for the front wheel housing liner connection -1- and the front wheel spoiler.

Fig 1: Identifying Bolts -Arrows- For Front Wheel Housing Liner Connection -1-

-- Remove the quick release -arrows- .

Fig 2: Identifying Quick Release -Arrows- And Front Noise Insulation -1-

-- Remove the front noise insulation -1- toward the rear and out of the lower section of the bumper cover.

• The guide tabs for the front noise insulation will disengage while doing this.

-- Remove the front noise insulation.