Overview - Cover And Cushion, Rear Seat Backrest With A Pass-Through
WARNING: This page is about a different variant/trim than selected.
NOTE:
The Illustration Only Shows The Structure Of The Right 2/3 Section Of The Backrest. The Structure Of The Left 1/3 Section Of The Backrest Is Similar.
- Trim
- For locking
- Lock Cylinder without Trim, Removing and Installing. Refer To LOCKING MECHANISM TRIM, REMOVING AND INSTALLING, LOCKING MECHANISM WITHOUT LOCK CYLINDER .
- Lock Cylinder with Trim, Removing and Installing. Refer To LOCKING MECHANISM TRIM, REMOVING AND INSTALLING, LOCKING MECHANISM WITH LOCK CYLINDER .
- Headrest Guide
- Removing and installing. Refer To HEADREST GUIDE, REMOVING AND INSTALLING .
- Cover Frame
- Only With The Right 2/3 Section Of The Backrest With Pass-Through
- Removing and installing. Refer To COVER FRAME, REMOVING AND INSTALLING .
- Backrest Shell
- Outer Bracket
- Release Cable
- Lock - Connector Station
- Inner Bracket
- Cushion
- Removing and installing. Refer To COVER AND PADDING, REMOVING AND INSTALLING, REAR SEAT BACKREST WITH PASS-THROUGH .
- Separate the cover from the padding. Refer To COVER AND PADDING, SEPARATING, REAR SEAT BACKREST WITH PASS-THROUGH
- Clip
- Covered In Foam Padding
- Clip
- Covered In Foam Padding
- Only With Fabric Covers
- Cover
- Removing and installing. Refer To COVER AND PADDING, REMOVING AND INSTALLING, REAR SEAT BACKREST WITH PASS-THROUGH .
- Separate the cover from the padding. Refer To COVER AND PADDING, SEPARATING, REAR SEAT BACKREST WITH PASS-THROUGH
- Cushion Clip
- Only With Leather Covers
- For Securing The Cover To The Padding
- Always Replace If Removed
- Install In Same Location As Before Removal
- Retaining Channel
- Sewn Into Cover
- For Engaging The Cover In The Backrest Shell
- Molding
- Only With The Right 2/3 Section Of The Backrest With Pass-Through
- Sewn Into Cover
- For Engaging The Cover In The Pass-Through Opening
- Molding
- Sewn into cover
- For Engaging The Cover In The Backrest Shell
- Plugs
- For Securing The Cover
- Quantity: 2