Overview - Cover And Cushion, Bench Seat With Center Storage Compartment

Fig 1: Bench Seat With Center Storage Compartment Overview

Courtesy of AUDI OF AMERICA, LLC

1. Cover
   • Removing and installing. Refer To COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT .
   • Separate The Cover From The Padding. Refer To COVER AND PADDING, SEPARATING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT 
2. Molding
   • Sewn Into Cover
   • For Engaging The Cover In The Rear And Side Channel At The Center Armrest
3. Contour Wire
   • Pushed Into The Cover
4. Molding
   • Sewn Into Cover
   • For Engaging The Cover In The Seat Frame
5. Left/Right Padding
   • Removing and installing. Refer To COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT .
   • Separate The Cover From The Padding. Refer To COVER AND PADDING, SEPARATING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT 
6. Center Storage Compartment
   • Separating The Cover From The Center Storage Compartment:
     • Right Cover. Refer To COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT 
     • Left Cover. Refer To COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT 
   • Removing and installing. Refer To CENTER STORAGE COMPARTMENT, REMOVING AND INSTALLING .
7. Clip
   • Covered In Foam Padding
   • Only With Fabric Covers
8. Clip
   • Covered In Foam Padding
9. Seat Frame
10. Cushion Clip
    • Only With Leather Covers
    • For Securing The Cover To The Padding
    • Always Replace If Removed
    • Install In Same Location As Before Removal