Headrest Trim, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove The Headrests. Refer To HEADREST, REMOVING AND INSTALLING .
-- Press The Sides Of The Padding Away From The Trim -1- In The Direction Of The -arrow-.
-- Bend The Leg Spring -2- Up Slightly Using A Wide Screwdriver.
-- Pull The Trim -1- Up At One Side At The Same Time Until It Disengages On One Side.
-- Perform The Same Step On The Other Side.
-- Remove The Trim -1- While Bending The Leg Spring -2- Up.