Headrest Cover And Cushion, Removing And Installing: Installing

Fig 1: Identifying Headrest Cover

Courtesy of AUDI OF AMERICA, LLC

-- Install Cover -1-.

-- Position The Cover -1- And Slide It Over The Support With Upholstery -2-.

-- Pull The Left And Right Corners Of The Cover -Arrow- Over The Support With The Padding -2-.

-- Pull The Cover So It Is Smooth.

-- Engage The Locking Channel -1-.

Fig 2: Locating Headrest Cover Corner

Courtesy of AUDI OF AMERICA, LLC

-- Bend The Leg Spring -2- Up While Sliding The Trim -1- On.

Fig 3: Locating Leg Spring

Courtesy of AUDI OF AMERICA, LLC

-- Hold The Leg Spring -2- Open Until The Trim -1- Slides Over The Notches Into The Locked Position.

-- Press The Trim -1- On Firmly Until It Engages.

-- Align The Cover -3- And Pull It So It Is Smooth.

-- Make Sure The Cover Lies On The Padding Without Any Wrinkles And Without Seam Markings.

Install In Reverse Order Of Removal.