Seat Pan Cover And Cushion, Removing And Installing, Bucket Seat: Removing

-- Remove The Seat Pan. Refer To SEAT PAN, REMOVING AND INSTALLING .

-- Detach Velcro fastener -2-.

Fig 1: Removing Bucket Seat Cover

Courtesy of AUDI OF AMERICA, LLC

-- Pry the retaining strip at the edge of seat cover -3- out from around the guide on the seat pan.

-- Detach rear retaining strip -1- at the seat pan.

-- Detach retaining strip -1- from the brackets -arrow- at the seat pan cushion and detach Velcro fastener -3- at seat pan cushion -2-.

Fig 2: Detaching Retaining Strip -1- From Holders -Arrow- At Seat Pan Cushion

Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat pan cover.

-- Remove seat bolster inflation adjuster -2- from retaining bracket -3- of the seat pan -arrow-.

Fig 3: Disengaging Flap With Air Cushion For Seat Bolster Inflation Adjustment

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect pneumatic hose -1- for seat bolster inflation adjustment at the Y-connector.

-- Remove the seat pan cushion with the seat bolster inflation adjuster.