Seat Heating Element -Z6- / -Z8-, Removing And Installing, Comfort Seat: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the cover and padding from the seat pan. Refer To SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, SEAT PAN WITH SEAT DEPTH ADJUSTER .
-- Disconnect the cover from the padding. Refer To SEAT PAN COVER AND CUSHION, SEPARATING, SEAT PAN WITH SEAT DEPTH ADJUSTER .
-- Cut the electrical wire -3- off directly at the old heating element -2-.
-- Cut through the connecting bars -arrows-.
-- Carefully loosen the seat heating elements -D and E- from the bonded connection and remove them.
NOTE:
The Spacer Fabric Must Not Be Damaged.
The old seat heating elements -A, B and C- remain on the padding and the new seat heating element is bonded over them.