Steering Wheel, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Installation is the reverse of removal, with special attention to the following:

Tightening specifications. Refer to OVERVIEW - STEERING WHEEL .

Before positioning steering wheel, make sure wheels are in straight position.

-- When installing a removed steering wheel, ensure that the markings on the steering column/steering wheel are aligned.

-- When installing a new steering wheel (without a marking): mount the steering wheel in its center position (the steering wheel spokes must be horizontal and the wheels must be in the straight-ahead position).

-- Install steering wheel.

-- Install The Airbag Unit. Refer To DRIVER SIDE AIRBAG and FRONT SIDE AIRBAG WITH IGNITER, REMOVING AND INSTALLING .

-- Perform Road Test.

-- If Steering Wheel Is Crooked, Remove It Again And Rotate It On Steering Column Splines.