SERVOTRONIC Solenoid Valve -N119-, Removing And Installing: Removing

Replacement Is Only Possible When The Steering Gear Is Removed.

-- Remove the steering gear. Refer to STEERING GEAR, REMOVING AND INSTALLING, HYDRAULIC POWER STEERING GEAR .

-- Always the clean steering gear -6- in the Solenoid Valve -- -3- area.

Fig 1: Identifying Servotronic Solenoid Valve Remove/Install Components

Courtesy of AUDI OF AMERICA, LLC

-- Make sure dirt cannot get into the steering gear -6-.

-- Disconnect the connector -8-.

-- Make sure dirt cannot get into the connector -8-.

-- Remove the bolts -1 and 2-.

-- Remove the Solenoid Valve -- -3- from the steering gear -6-.

-- Remove the screen -7- from the steering gear -6- and clean steering gear, if necessary.