Boot, Removing And Installing, Electro-Mechanical Steering Gear: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Torque Wrench 1331 5-50 Nm :VAG1331
- Torque Wrench 1332 40-200 Nm :VAG1332
- Torque Wrench 1332 Insert - Ring Wrench - 21mm:VAG1332/7
- 9" Mobea Heater Hose Clamp Pliers:HCP10
- Clamping Pliers:VAG1682A with Clamping Pliers - Jaws :VAG1682A/1
- Puller - Ball Joint:T40010A