Steering Angle Sensor -G85-, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Straighten The Wheels.
Coil Connector With Slip Ring -1-.
-- Remove Airbag Unit And Steering Wheel. Refer To STEERING WHEEL, REMOVING AND INSTALLING .
- Clipped onto the switch for turn signals, high/low beam headlamps and headlamp flasher.
- Clipped to the coil ring with slip ring.
WARNING:
The coil ring with slip ring must not be turned when they has been removed.
-- Remove The Steering Column Switch Module. Refer to STEERING COLUMN SWITCH MODULE, REMOVING AND INSTALLING ) .