Hydraulic Oil Cooler, Removing And Installing, 8-Cylinder FSI, With Dynamic Steering: Removing

-- Remove the bolts -1, 2, 3 and 5- and remove the front lock carrier cover -4-. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING / OVERVIEW - LOCK CARRIER .

Fig 1: Front Lock Carrier Cover

Courtesy of AUDI OF AMERICA, LLC

-- Lift the lock carrier cover -4- -arrow- and disengage it from the radiator grille. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING / OVERVIEW - LOCK CARRIER .

-- Clamp off the hydraulic lines -5 and 6- with the :3094  .

Fig 2: Hydraulic Oil Cooler, Vehicles With Dynamic Steering (1 Of 2)

Courtesy of AUDI OF AMERICA, LLC

-- Remove the clamping sleeves -3 and 4-.

Fig 3: Hydraulic Oil Cooler, Vehicles With Dynamic Steering (1 Of 2)

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the hydraulic lines -5 and 6- from the hydraulic oil cooler.

-- Release the retaining tabs -3-, tilt the hydraulic oil cooler -1- forward slightly and remove it from the mounts -2- on the A/C condenser.

Fig 4: Hydraulic Oil Cooler To Condenser

Courtesy of AUDI OF AMERICA, LLC