2., 5 Mm2, 4 Mm2 Or 6 Mm2 Aluminum Wires With Separate Butt Connectors, Repairing: Notes

WARNING: This page is about a different variant/trim than selected.

Special Tools And Workshop Equipment Required

Wiring Harness Repair Set - Hot Air Blower:VAS1978/14A from the Wiring Harness Repair Set:VAS1978B
Wiring Harness Repair - Blower - Shrink Element:VAS1978/15A from the Wiring Harness Repair Set:VAS1978B
Wiring Harness Repair Set:VAS631001

NOTE:

Observe general notes for repairs on the vehicle electrical system. Refer to VEHICLE ELECTRICAL SYSTEM, GENERAL REPAIR INFORMATION .

For the repair there are copper repair wires with a 2.5 mm² or 4 mm² or 6 mm² cross section.

There are also separate copper repair wires with a crimped on contacts available for the repair.