Wiring Harness Repair Set - Copper:Vas631003
WARNING: This page is about a different variant/trim than selected.
The :VAS631003 Makes Optimal Repair Quality Possible In The Realm Of Vehicle Electronics. With This Wiring Harness-Repair Kit Repairs Can Be Performed On 10 mm2 and 16 mm2 Wires In The Area Of The Connections And On Open Circuits. The Repair Wires Are Also Used An Complete Repair Wires With Already Crimped On/Connected Contacts. The Connection With The Vehicle-Specific Wiring Harness Takes Place With Two Different Wire Cross-Sections Butt Connectors.
The :VAS631003 for 10 mm2 and 16 mm2 wires is comprised of the following components.
- Case With Inlays:VAS631003/1
- Hand Pliers:VAS631003/2
- Insulation Removal Tool:VAS631003/3
- Pair Of Cable Cutters:VAS631003/4
- Exchangeable Head 10 mm 2:VAS631003/5
- Exchangeable Head 16 mm 2:VAS631003/6
NOTE:
Additional Information:
Refer To The :VAS631003 Owner's Manual.