Crimping Pliers With Insert
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Wiring Harness Repair Set:VAS1978B
- Wiring Harness Repair Set - Crimping Head - 4-6 mm:VAS1978/2A
- Wiring Harness Repair - Crimping Head -.35-2.5 mm:VAS1978/1-1
- Wiring Harness Repair - Crimping Plier - Base Tool:VAS1978/1-2
- Wiring Harness Repair - Interchangeable Head:VAS1978/1-3
The :VAS1978/1-2 With The :VAS1978/1-1 And The :VAS1978/2A Are Components Of The :VAS1978B . Additionally There Is Also The :VAS1978/1-3 . These Exchangeable Heads With The Crimping Pliers Are Inserted To Crimp The Crimp Connector During A Wiring Harness Repair.
| Color Of Crimp Connectors | Color Of Crimping Slot | Wire Cross-Section | Exchangeable Head |
|---|---|---|---|
| Transparent | None | 0.13 mm2 /0.35 mm2 /0.5 mm2 | :VAS1978/1-3 |
| Transparent | Yellow | 0.35 mm 2 through 0.5 mm 2 | :VAS1978/1-1 |
| Red | Red | 0.5 mm2 - 1.0 mm2 | :VAS1978/1-1 |
| Blue | Blue | 1.5 mm2 - 2.5 mm2 | :VAS1978/1-1 |
| Yellow | Yellow | 4.0 mm2 - 6.0 mm2 | :VAS1978/2A |
NOTE:
Always Be Sure To Use The Correct Crimping Slot For The Crimping Connection Used.
Do Not Crimp Wire Insulation.