Crimping Pliers -.35-2.5MM:Vas1978/1A

WARNING: This page is about a different variant/trim than selected.

The : VAS1978/1A Or The :VAS1978/1-2 Together With The :VAS1978/1-1 , The :VAS1978/1-3 , or the :VAS1978/2A Are Used To Press The Crimp Connector From The Wiring Harness-Repair Kit.

Courtesy of AUDI OF AMERICA, LLC

Crimp Connectors, Press Using The :VAS1978/1A .

The Following Crimping Heads Are Available For The :VAS1978/1-2 :

Wiring Harness Repair - Interchangeable Head:VAS1978/1-3
Wiring Harness Repair - Crimping Head -.35-2.5 mm:VAS1978/1-1
Wiring Harness Repair Set - Crimping Head - 4-6 mm:VAS1978/2A
Wiring Harness Repair Set - Crimping Head - JPT:VAS1978/9-1

In Conjunction With :VAS1978/9-1 , Crimping Pliers Are Used To Crimp Terminals Onto Individual Wires When Repairing Wiring Cross-Sections Up To 0.35 mm² .

Changing The Crimping Head:

-- Open Crimp Pliers Completely.

-- Disengage Both Locking Pins -Arrows- From Crimp Pliers Basic Tool.

Courtesy of AUDI OF AMERICA, LLC

-- Insert The Required Crimping Head From Above -Arrow- In Crimp Pliers Basic Tool.

Courtesy of AUDI OF AMERICA, LLC

-- Lock The Crimping Head By Pressing In The Pins -Arrows- Into Crimp Pliers Basic Tool.

Courtesy of AUDI OF AMERICA, LLC