Terminal 30 Wire Junction 2 -TV22-, Removing And Installing: Removing

Fig 1: Identifying Alarm Horn, Removal

Courtesy of AUDI OF AMERICA, LLC

Vehicles Through 05/2008: 

-- Unclip The Plenum Chamber Cover -2- And Remove It.

Vehicles From 06/2008: 

Fig 2: Identifying Plenum Chamber Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -3-.

-- Remove the clips -2- from the mount and remove the plenum chamber cover -1-.

Continuation For All Vehicles: 

Fig 3: Opening Terminal Box Cover

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainer -arrow A- and open the cover -arrow B-.

-- Remove the wires -1, 2, 3 and 5, 6 and 9-.

Fig 4: Identifying Terminal 30 Wire Junction 2 Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -8- and remove the Terminal 30 Wire Junction 2 -TV22- from the tower brace.