Right Instrument Panel Fuse Panel, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Fuse Panel D, With Right Instrument Panel Fuse Panel Components

Courtesy of AUDI OF AMERICA, LLC

-- With The Ignition Switched Off, Disconnect The Battery Ground Cable. Refer To BATTERY, DISCONNECTING AND CONNECTING .

-- Remove The Glove Compartment. Refer To GLOVE COMPARTMENT, REMOVING AND INSTALLING .

-- Release the clips -1- in the direction of the -arrow- and press the relay panels -2- and -3- toward the rear and out of the fuse panel D.

NOTE:

Ignore -Item 4-.

-- Remove The Fuses From The Fuse Panel.

Fig 2: Releasing Clips And Removing Cover From Fuse Holder

Courtesy of AUDI OF AMERICA, LLC

-- Release Clips -Arrows- And Remove The Cover From The Fuse Panel.

-- Remove The Retaining Strip -1- For The Connectors -Arrow- And Remove The Connectors From The Plug-In Socket.

Fig 3: Pulling Off Retaining Strip

Courtesy of AUDI OF AMERICA, LLC

NOTE:

For The Exact Assignment Of Right Instrument Panel Fuse Panel Refer To The Appropriate Wiring Diagram(s).