Fuse Panel D -SD- With Right Instrument Panel Fuse Panel, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn off the ignition and remove the key.
-- Remove The Glove Compartment. Refer To GLOVE COMPARTMENT, REMOVING AND INSTALLING .
-- Remove the mount for the Instrument Panel Can Cut-Off Connector -T46s- -Item 4-. Refer to INSTRUMENT PANEL CAN CUT-OFF CONNECTOR -T46S- MOUNT, REMOVING AND INSTALLING .
-- Release the clips -1- in the direction of the -arrow- and press the relay panels -2- and -3- toward the rear and out of the fuse panel D.
-- Open the clips -arrow A- and remove fuse panel D -item 2- in direction of -arrow B- on the central tube -1- for the instrument panel.