Fuse Panel In Engine Compartment E-Box, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Fuse Panel B Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove fuse panel B. Refer to FUSE PANEL B -SB- IN ENGINE COMPARTMENT E-BOX, REMOVING AND INSTALLING .

-- Release The Clip -Arrow- And Push The Fuse Panel -2- Out Toward The Rear And Disengage It.

NOTE:

Ignore The Remaining -Items-.

-- Remove The Fuses From The Fuse Panel.

Fig 2: Releasing Clips And Removing Cover From Fuse Holder

Courtesy of AUDI OF AMERICA, LLC

-- Release Clips -Arrows- And Remove The Cover From The Fuse Panel.

-- Pull Off Retaining Strip -1- For The Connectors -Arrow- And Remove The Connectors From The Plug-In Socket

Fig 3: Pulling Off Retaining Strip

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The Exact Assignment Of The Fuse Panel In The Engine Compartment E-Box Can Be Found In The Applicable Wiring Diagram. Refer To The Appropriate Wiring Diagram(s) .