Garage Door Opener Control Module -J530-, Removing And Installing, Through My 2012: Removing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Garage Door Opener Control Module, Removal

Courtesy of AUDI OF AMERICA, LLC

-- If Replacing The Control Module, Select The "Replace Control Module" Function For The Corresponding Control Module On The Vehicle Diagnostic Tester.

-- Remove The Lock Carrier Cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Disconnect The Connector -1-.

-- Release The Clip -arrow- And Remove The Garage Door Opener Control Module -J530- -Item 2- From The Frame.