Garage Door Opener Control Module -J530-, Removing And Installing, From My 2013: Removing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Garage Door Opener Control Module, Removal

Courtesy of AUDI OF AMERICA, LLC

-- If Replacing The Control Module, Select The "Replace Control Module" Function For The Corresponding Control Module On The Vehicle Diagnostic Tester.

-- Remove The Lock Carrier Cover. Refer To LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Open The Tab -4- -Arrow- And Remove The Control Module -2- From The Mount -3-.

-- Disconnect The Connector -1-.