Fresh Air Blower Control Module -J126-, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Installation Is Carried Out In The Reverse Order While Observing The Following.
-- Turn On The Ignition.
-- Check the DTC memory for the Climatronic Control Module -J255- display and control head and erase any displayed malfunctions, if necessary using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.
-- To check the function, perform the output diagnostic test mode for the A/C system using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.