LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Air Conditioning (Front Heater & A/C Unit) (Coupe)) >> 87 Air Conditioning >> Front Heater And A/C Unit >> Fresh Air Blower -V2-, Removing And Installing >> Installing

Fresh Air Blower -V2-, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Installation Is Carried Out In The Reverse Order While Observing The Following.

-- If the locking mechanism -A- breaks or can no longer hold, the Fresh Air Blower -V2- -B- can also be secured to the air intake housing with a bolt -C-.

-- When installing, make sure the Fresh Air Blower -V2- -B- fits correctly in air intake housing.

-- Turn On The Ignition.

-- Check the DTC memory for the Climatronic Control Module -J255- display and control head and erase any displayed malfunctions, if necessary using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.

-- To check the function, perform the output diagnostic test mode for the A/C system using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.

scientia non olet · About LEMON Manuals