LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Air Conditioning (Front Heater & A/C Unit) (Coupe)) >> 87 Air Conditioning >> Display And Control Head >> Interior Temperature Sensor Fan, Removing And Installing >> Installing

Interior Temperature Sensor Fan, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Installation Is Carried Out In The Reverse Order While Observing The Following.

-- When installing the Interior Temperature Sensor Fan -V42-, do not press on the fan wheel -D-, but rather hold the blower firmly at the housing.

-- Turn On The Ignition.

-- Check the DTC memory for the Climatronic Control Module -J255- display and control head and erase any displayed malfunctions, if necessary using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.

scientia non olet · About LEMON Manuals