Hybrid Battery Refrigerant Shut-Off Valve 1 -N516-, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn Off The Ignition.
-- Discharge The Refrigerant Circuit. Refer To REFRIGERANT CIRCUIT, DISCHARGING WITH A/C SERVICE STATION , REFRIGERANT CIRCUIT, EVACUATING WITH A/C SERVICE STATION , and REFRIGERANT CIRCUIT, CHARGING WITH A/C SERVICE STATION (Refrigerant R134a, Servicing; Refrigerant Circuit, Using Service Station).
-- Free up the clip -2- for the wiring harness on the refrigerant pipe.
-- Remove the bolt -3- and separate the refrigerant pipe -4-.
NOTE:
Ignore items -1, 5 and 6-.
-- Disconnect and remove the connector -3- from the bracket.
-- Remove the union nuts -1 and 2- while counterholding on the connection and remove the Hybrid Battery Refrigerant Shut-Off Valve 1 -N516-.