LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Air Conditioning (Front Heater & A/C Unit) (Coupe)) >> 87 Air Conditioning >> Air Guide >> Air Intake Duct, Removing And Installing >> Installing

Air Intake Duct, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Installation Is Carried Out In The Reverse Order While Observing The Following.

-- Insert The Air Intake Duct -B- Into The Brackets -C- On The Air Intake Housing -C- And Join Both Parts Together.

NOTE:

If One Of The Retaining Tabs -A- Has Broken Off Or If One Of The Welded Points No Longer Holds, Both Housing Parts Can Be Bolted Together With Screws -D-.

-- Install the removed parts in the opposite order.

-- Perform A Basic Setting And The Output Diagnostic Test Mode For The A/C System Using The Vehicle Diagnostic Tester In The "Guided Fault Finding" Function.

-- Check The DTC Memory For The Climatronic Control Module -J255- Display And Control Head And Erase Any Displayed Malfunctions, If Necessary Using The Vehicle Diagnostic Tester In The "Guided Fault Finding" Function.