Right Front Upper Body Vent Temperature Sensor -G386-, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Turn Off The Ignition.

-- Remove The Glove Compartment. Refer To GLOVE COMPARTMENT, REMOVING AND INSTALLING .

-- Disconnect The Connector -A- From The Temperature Sensor.

Fig 1: Disconnect Connector From Temperature Sensor

Courtesy of AUDI OF AMERICA, LLC

-- Turn the Right Front Upper Body Vent Temperature Sensor -G386- -B- approximately 90° and remove it from the mount in the air guide channel -D-.