Right FOOTWELL Vent Temperature Sensor -G262-, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Move the passenger seats as far back as possible.
-- Turn off the ignition.
-- Remove The Glove Compartment. Refer To GLOVE COMPARTMENT, REMOVING AND INSTALLING .
-- Remove the right footwell vent (front passenger side) -C-. Refer to FRONT PASSENGER SIDE FOOTWELL VENT, REMOVING AND INSTALLING .
-- Disconnect the connector -A-.
-- Turn the sensor -D- 90° and remove it from the right footwell vent -C-.