FOOTWELL Vent Temperature Sensor -G192- /Left FOOTWELL Vent Temperature Sensor -G261-, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Installation Is Carried Out In The Reverse Order While Observing The Following.
-- Check The Seal -C- For Damage And Proper Seating.
-- Reinstall The Removed Parts In The Opposite Order.
-- Check the DTC memory for the Climatronic Control Module -J255- display and control head and erase any displayed malfunctions, if necessary using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.