LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Air Conditioning (A/C Compressor) (Coupe)) >> 87 Air Conditioning >> A/C Compressor >> Drive Plate With Overload Protection, Removing And Installing >> Installing Drive Plate

Installing Drive Plate

WARNING: This page is about a different variant/trim than selected.

-- Position Drive Plate With Overload Protection -B- Onto Drive Plate -C-.

-- Install The Bolts -A- And Tighten By Hand.

-- Check The Drive Plate Run-Out -B-. Refer To DRIVE PLATE WITH OVERLOAD PROTECTION, CHECKING RUN-OUT AND ADJUSTING .

-- Tighten The Bolts -A- (Tightening Specification: 10 Nm  ).

-- Check The Drive Plate Run-Out -B- Once More. Refer To DRIVE PLATE WITH OVERLOAD PROTECTION, CHECKING RUN-OUT AND ADJUSTING .

scientia non olet · About LEMON Manuals