Refrigerant Lines For Battery Cooling Module In Luggage Compartment, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Turn off the ignition.

-- Discharge the refrigerant circuit. Refer to REFRIGERANT CIRCUIT (Refrigerant R134a, Servicing; Refrigerant Circuit, Using Service Station).

-- Remove the high voltage battery. Refer to appropriate service information. .

-- Remove the bolts -2 and 3- and the refrigerant lines -1 and 4-.

Fig 1: Identifying Refrigerant Line Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 and 4- and disconnect and remove the refrigerant pipes -1 and 3-.

Fig 2: Identifying Refrigerant Pipe Components

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Close all open lines and connections on the refrigerant line with suitable caps (avoid dirt and moisture from entering the system).