Refrigerant Line Pass-Through In Luggage Compartment, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Discharge the refrigerant circuit. Refer to REFRIGERANT CIRCUIT (Refrigerant R134a, Servicing; Refrigerant Circuit, Using Service Station).
-- Remove the traction battery. Refer to appropriate service information. .
-- Remove the bolts -2 and 4- and the refrigerant lines -1 and 3-.
-- Remove the bolts -1 and 3-. Disconnect and remove the refrigerant pipes -2 and 4-.
NOTE:
Close all open lines and connections on the refrigerant line with suitable caps (avoid dirt and moisture from entering the system).
-- Remove the nuts -arrows- and remove the pass-through for the refrigerant lines -1-.