A/C Pressure/Temperature Sensor -G395-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

-- Turn off the ignition.

-- Remove the upper lock carrier cover. Refer to LOCK CARRIER .

-- Disconnect the connector -A-.

Fig 1: Disconnecting Electrical Connector

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the A/C Pressure/Temperature Sensor -G395- -A- from the condenser connector -C-.

Fig 2: A/C Pressure/Temperature Sensor & Condenser Connector

Courtesy of AUDI OF AMERICA, LLC