A/C Pressure/Temperature Sensor -G395-, REMOVING AND INSTALLING: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
The cooling output cannot be checked when the A/C Pressure/Temperature Sensor -G395- is removed. The Climatronic Control Module -J255- display and control head does not switch on the A/C compressor.
The refrigerant circuit remains closed, connection with valve.
Only the A/C Pressure/Temperature Sensor -G395- may be installed on this vehicle (the data exchange occurs via the LIN Bus). Refer to the Parts Information.
A High Pressure Sensor -G65- cannot be installed on this vehicle (it only delivers square-wave signals). Refer to Parts Information.