Test Sequence:
WARNING: This page is about a different variant/trim than selected.
-- Turn on the ignition.
-- Check the ground and positive connection to the terminal -A-.
-- Check the connection and the function of the A/C Pressure/Temperature Sensor -G395- using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.
NOTE:
The A/C compressor (A/C Compressor Regulator Valve -N280-) is not actuated when the connector -A- is disconnected.
The A/C Pressure/Temperature Sensor -G395- is an electronic control module over which exchanges information with the Vehicle Electrical System Control Module -J519- via a local Data Bus using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.