Upper Steering Column Trim Panel, Removing And Installing: Removing

-- Move The Steering Wheel As Far Down As Possible.

-- Using A Flat-Head Screwdriver, Carefully Unclip The Gap Cover -2- From The Steering Column Switch Module Upper Trim -1- In Direction Of -Arrow A-.

Fig 1: Disengaging Gap Cover From Upper Steering Column Switch Module Trim

Courtesy of AUDI OF AMERICA, LLC

-- Rotate The Steering Wheel 90° Out Of The Straight Position.

-- Carefully Pry The Upper Steering Column Switch Module Trim Off Of Lower Trim -3- Using A Small Flat-Head Screwdriver In Direction Of -B Arrows-.

-- Disengage The Upper Steering Column Switch Module Trim From The Lower Trim And Remove It.