Glove Compartment Lid, Removing And Installing: Removing

-- Remove The Glove Compartment. Refer To GLOVE COMPARTMENT, REMOVING AND INSTALLING, VEHICLES WITHOUT KNEE AIRBAGS .

-- Remove The Hinge Pin From The Brake Component. Refer To GLOVE COMPARTMENT LID DAMPENING MECHANISM, REMOVING AND INSTALLING .

-- Set The Glove Compartment Down With The Top Side On A Soft Surface.

-- Drive The Left And Right Hinge Pins Out Using A 4 Mm Hex Socket Wrench -1- (Or Another Suitable Tool) In Direction Of -arrow-.

Fig 1: Identifying Glove Compartment

Courtesy of AUDI OF AMERICA, LLC

-- Remove Glove Compartment Cover -2- From The Glove Compartment.