Glove Compartment Lid Dampening Mechanism, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Switch The Ignition Off And Remove The Ignition Key.

-- Remove The Side Cover From The Instrument Panel On The Passenger Side. Refer To INSTRUMENT PANEL SIDE COVER, REMOVING AND INSTALLING .

-- Disengage The Right Instrument Panel Fuse Panel And Slide To The Side. Refer To FUSE PANEL ON RIGHT SIDE OF INSTRUMENT PANEL, REMOVING AND INSTALLING .

Relay Carriers, Fuse Panels And E-Boxes; Fuse Panel On Right Side Of Instrument Panel, Removing And Installing

-- Disconnect The Connector -3-.

Fig 1: Releasing Glove Compartment Lamp Switch

Courtesy of AUDI OF AMERICA, LLC

-- Remove The Hinge Bolts -1-.

-- Turn The Switch -2- Counterclockwise -Arrow- And Remove It.