Inner Tail Lamp, Removing And Installing, Led From My 2013: Removing

Fig 1: Removing Cover

Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition and remove the key.

-- Turn the headlamp switch to "0".

-- Remove the cover -1- in direction of -arrow-.

-- Disconnect the connector -5-.

Fig 2: Identifying Clamping Brackets & Nuts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -7- and remove the large clamping bracket -6-.

-- Remove the nuts -2 and 3- and then remove the clamping bracket -1 and 4-.

-- Remove the inner tail lamp toward the outside.