OVERVIEW - REAR LID TAIL LAMPS, LED, From MY 2013: Notes
WARNING: This page is about a different variant/trim than selected.
- Inner Tail Lamps
- Removing and installing. Refer to INNER TAIL LAMP, REMOVING AND INSTALLING, LED .
- Seal
- Replace if damaged.
- Lower Clamping Bracket
- For Securing Tail Lamp Assembly To The Rear Lid
- Nut
- Tightening Specification and sequence. Refer to Figure
- Upper Clamping Bracket
- For securing tail lamp assembly to the rear lid
- Nut
- Tightening Specification and sequence. Refer to Figure
- Nut
- Tightening Specification and sequence. Refer to Figure
- Large clamping bracket
- For securing tail lamp assembly to the rear lid