LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (Exterior Lights, Switches (Coupe)) >> 94 Exterior Lights, Switches >> Tail Lamps >> Bulb Holder, Removing And Installing >> BULB SOCKET, REMOVING AND INSTALLING, LED Through MY 2012 >> Removing

BULB SOCKET, REMOVING AND INSTALLING, LED Through MY 2012: Removing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Outer Tail Lamp
GWWA94-10776Courtesy of AUDI OF AMERICA, LLC

-- Remove the outer tail lamp. Refer to OUTER TAIL LAMP, REMOVING AND INSTALLING, LED .

-- Turn the bulb socket -1- counterclockwise -arrow- and remove it from the tail lamp housing.

-- Remove the bulb from the bulb socket.

NOTE:

Ignore -item 2-.