LEFT/RIGHT BACK-UP LAMP BULB -M16- / -M17-, REMOVING AND INSTALLING, AUDI A5, LED Through MY 2012: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn off the ignition and remove the key.
-- Turn the headlamp switch to "0".
-- Remove the cover -1- in direction of -arrow-.
-- Remove the nut -2- and remove the large clamping bracket -1-.
Fig 2: Unlocking Bulb Socket -3- With Needle Nose Pliers On Left Tail Lamp, Turn Counter-Clockwise -Arrow- ; On Right Tail Lamp, Turn Clockwise
-- Unlock the bulb socket -3- with needle nose pliers: on the left tail lamp assembly, turn counter-clockwise -arrow- ; on the right tail lamp assembly, turn clockwise.
-- Pull the bulb socket out of the tail lamp housing.
-- Remove the back-up lamp bulb from the socket.