Access/Start Authorization Switch -E415-, Removing And Installing: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
Induction Coil For Immobilizer Is Secured To Access/Start Authorization Switch -E415- And Cannot Be Replaced Separately.
If induction coil is malfunctioning, Access/Start Authorization Switch -E415- must be replaced.
If access/start authorization switch is replaced, no adaptation of immobilizer is necessary.
The lock in the Access/Start Authorization Switch is not coded mechanically.
Keys must therefore not be replaced when access/start authorization switch is replaced; present keys continue to match.
Special Tools And Workshop Equipment Required
- Ignition Lock Pliers:VAS6339