Parking Aid Control Module -J446-, Removing And Installing, Without Trailer Hitch: Notes
WARNING: This page is about a different variant/trim than selected.
The Parking Aid Control Module Is Integrated In The Vehicle Electrical System Control Module -J519-, Depending On The Version From MY 2012/USA From MY 2013, And Cannot Be Replaced Separately If Faulty.
-- Replace The Vehicle Electrical System Control Module. Refer to VEHICLE ELECTRICAL SYSTEM CONTROL MODULE -J519-, REMOVING AND INSTALLING .
-- If replacing the control module, select the "Replace control module" function for the corresponding control module on the Vehicle Diagnostic Tester.