High-Mounted Brake Lamp Bulb -M25-, Removing And Installing, Coupe: Installing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Connecting Electrical Connector

Courtesy of AUDI OF AMERICA, LLC

Install In Reverse Order Of Removal. Note The Following:

NOTE:

If LED's Are Malfunctioning, High-Mount Brake Light Must Be Completely Replaced.

-- The mount -2- for the high-mounted brake lamp -3- must engage evenly at the left and right in the guide rails -1-.

-- Slide the high-mounted brake lamp evenly forward in the direction of travel without tilting it until it engages audibly -arrows-.