Part 2 - Repair Kit
WARNING: This page is about a different variant/trim than selected.
- Headlamp Housing
- Removing and installing. Refer to HEADLAMP, REMOVING AND INSTALLING, HID HEADLAMP, .
- Headlamp Beam Adjustment Motor
- Left Headlamp Beam Adjustment Motor -V48-
- Right Headlamp Beam Adjustment Motor -V49-
- Removing and installing. Refer to LEFT/RIGHT HEADLAMP BEAM ADJUSTMENT MOTOR -V48- / -V49-, REMOVING AND INSTALLING, HID HEADLAMPS, .
- Grommet
- The headlamp housing must be opened to replace the adjustment motor
- A grommet can be ordered to seal the assembly opening.
- Removing and installing. Refer to LEFT/RIGHT HEADLAMP BEAM ADJUSTMENT MOTOR -V48- / -V49-, REMOVING AND INSTALLING, HID HEADLAMPS, .
- Screw
- 1.4 Nm
- Quantity: 2