Part 2 - Repair Kit
WARNING: This page is about a different variant/trim than selected.
- Headlamp Housing
- Removing and installing. Refer to HEADLAMP, REMOVING AND INSTALLING, HALOGEN HEADLAMP, .
- Headlamp Beam Adjustment Motor
- Left Headlamp Beam Adjustment Motor -V48-
- Right Headlamp Beam Adjustment Motor -V49-
- Removing and installing. Refer to LEFT/RIGHT HEADLAMP BEAM ADJUSTMENT MOTOR -V48- / -V49-, REMOVING AND INSTALLING, HALOGEN HEADLAMPS, .
- Headlamp Beam Adjustment Motor Housing Cover
- The Headlamp Housing Must Be Cut Open To Replace The Adjustment Motor
- A Housing Cover Can Be Ordered To Seal The Assembly Opening.
- Removing and installing. Refer to LEFT/RIGHT HEADLAMP BEAM ADJUSTMENT MOTOR -V48- / -V49-, REMOVING AND INSTALLING, HALOGEN HEADLAMPS, .
- Screw
- 2 Nm
- From The Repair Kit For The Headlamp Range Control Adjustment Motor Cover
- Quantity: 2
- Screw
- 1.4 Nm
- Quantity: 2