LEFT/RIGHT POSITION LAMP BULB -M1- / -M3-, REMOVING AND INSTALLING, HALOGEN HEADLAMPS, From MY 2013: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn the light switch to position "0".
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Do not operate the headlamp flasher.
-- On the right: remove the air filter housing. Refer to AIR FILTER HOUSING, LOWER SECTION [CALA] , AIR FILTER HOUSING, LOWER SECTION [CAKA, CCBA, CMUA, CGWC, CGXC, CHMB, CTUB] , AIR FILTER HOUSING [CFSA] , AIR FILTER HOUSING [CAEB, CPMA] , AIR FILTER HOUSING, REMOVING AND INSTALLING [CAUA] .
-- Remove the housing cover -1- from the headlamp housing -arrow-.
-- Turn the socket -4- counterclockwise -arrow- and remove it from the housing.
-- Release the clip -3- and remove the connector -2- from the bulb socket -1- with the bulb.